ASTM STANDARD SPECIFICATION

A-1-00 Standard Specification for Carbon Steel Tee Rails
A-2-02 Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
A-3-01 Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
A-6/A-6M-03c Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
A-20/A-20M-02 Standard Specification for General Requirements for Steel Plates for Pressure Vessels
A-27/A-27M-03 Standard Specification for Steel Castings, Carbon, for General Application
A-29/A-29M-03 Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought and Cold-Finished, General Requirements for
A-31-00 Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
A-34/A-34M-01 Standard Practice for Sampling and Procurement Testing of Magnetic Materials
A-36/A-36M-03a Standard Specification for Carbon Structural Steel
A-47/A-47M-99 Standard Specification for Ferritic Malleable Iron Castings
A-48/A-48M-03 Standard Specification for Gray Iron Castings
A-49-01 Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
A-53/A-53M-02 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
A-65-01 Standard Specification for Steel Track Spikes
A-66-01 Standard Specification for Steel Screw Spikes
A-67-00 Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked
A-74-03b Standard Specification for Cast Iron Soil Pipe and Fittings
A-82-02 Standard Specification for Steel Wire, Plain, for Concrete Reinforcement
A-90/A-90M-01 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
A-99-03 Standard Specification for Ferromanganese
A-100-93(2000) Standard Specification for Ferrosilicon
A-101-93(2000) Standard Specification for Ferrochromium
A-102-93(2000) Standard Specification for Ferrovanadium
A-105/A-105M-03 Standard Specification for Carbon Steel Forgings for Piping Applications
A-106-02a Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
A-108-03 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
A-109/A109M-03 Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
A-111-99a Standard Specification for Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire
A-116-00 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric
A-121-99 Standard Specification for Zinc-Coated (Galvanized) Steel Barbed Wire
A-123/A-123M-02 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
A-125-96(2001) Standard Specification for Steel Springs, Helical, Heat-Treated
A-126-95(2001) Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
A-128/A-128M-93(2003) Standard Specification for Steel Castings, Austenitic Manganese
A-131/A-131M-01 Standard Specification for Structural Steel for Ships
A-132-89(2000) Standard Specification for Ferromolybdenum
A-134-96(2001) Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
A-135-01 Standard Specification for Electric-Resistance-Welded Steel Pipe
A-139-00 Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
A-143/A-143M-03 Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
A-144-02 Specification for Ferrotungsten
A-146-64(2000) Standard Specification for Molybdenum Oxide Products
A-148/A148M-03 Standard Specification for Steel Castings, High Strength, for Structural Purposes
A-153/A153M-03 Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
A-159-83(2001) Standard Specification for Automotive Gray Iron Castings
A-167-99 Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
A-176-99 Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip
A-178/A178M-02 Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
A-179/A179M-90a(2001) Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
A-181/A181M-01 Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
A-182/A182M-02 Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
A-183-03 Standard Specification for Carbon Steel Track Bolts and Nuts
A-184/A184M-01 Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement
A-185-02 Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete
A-192/A-192M-02 Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
A-193/A-193M-03 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service
A-194/A-194M-03b Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
A-197/A-197M-00 Standard Specification for Cupola Malleable Iron
A-202/A-202M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Manganese-Silicon
A-203/A-203M-97(2003) Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
A-204/A-204M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
A-209/A-209M-03 Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
A-210/A-210M-02 Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
A-213/A-213M-03b Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
A-214/A-214M-96(2001) Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
A-216/A-216M-93(2003) Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High- Temperature Service
A-217/A-217M-02 Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
A-220/A-220M-99 Standard Specification for Pearlitic Malleable Iron
A-225/A-225M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
A-227/A-227M-99 Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs
A-228/A-228M-02 Standard Specification for Steel Wire, Music Spring Quality
A-229/A-229M-99 Standard Specification for Steel Wire, Oil-Tempered for Mechanical Springs
A-230/A-230M-99 Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
A-231/A-231M-96(2002) Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
A-232/A-232M-99 Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
A-234/A-234M-03 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
A-239-95(1999) Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
A-240/A-240M-03c Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
A-242/A-242M-03a Standard Specification for High-Strength Low-Alloy Structural Steel
A-247-67(1998) Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings
A-249/A-249M-03a Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
A-250/A-250M-95(2001) Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes
A-252-98(2002) Standard Specification for Welded and Seamless Steel Pipe Piles
A-254-97(2002) Standard Specification for Copper-Brazed Steel Tubing
A-255-02 Standard Test Method for Determining Hardenability of Steel
A-262-02a Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
A-263-03 Standard Specification for Stainless Chromium Steel-Clad Plate
A-264-03 Specification for Stainless Chromium-Nickel Steel-Clad Plate
A-265-03 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
A-266/A-266M-03a Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
A-268/A-268M-03 Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
A-269-02a Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
A-270-03a Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
A-275/A-275M-98(2003) Standard Test Method for Magnetic Particle Examination of Steel Forgings
A-276-03 Standard Specification for Stainless Steel Bars and Shapes
A-278/A-278M-01 Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)
A-283/A-283M-03 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
A-285/A-285M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
A-288-91(2003) Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
A-289/A-289M-97(2003) Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
A-290-02 Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
A-291-03 Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
A-295-98 Standard Specification for High-Carbon Anti-Friction Bearing Steel
A-297/A-297M-97(2003) Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
A-299/A-299M-03e1 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
A-302/A-302M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
A-304-02 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
A-307-03 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
A-308/A-308M-03 Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
A-309-01 Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
A-311/A-311M-95(2000) Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
A-312/A-312M-03 Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes
A-313/A-313M-03 Standard Specification for Stainless Steel Spring Wire
A-314-97(2002) Standard Specification for Stainless Steel Billets and Bars for Forging
A-319-71(2001) Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts
A-320/A-320M-03 Standard Specification for Alloy-Steel Bolting Materials for Low-Temperature Service
A-321-90(2001) Standard Specification for Steel Bars, Carbon, Quenched and Tempered
A-322-91(2001) Standard Specification for Steel Bars, Alloy, Standard Grades
A-323-93(2000) Standard Specification for Ferroboron
A-324-73(2000) Standard Specification for Ferrotitanium
A-325-02 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
A-325M-03 Standard Specification for Structural Bolts, Steel, Heat Treated 830 Mpa Minimum Tensile Strength [Metric]
A-327-91(1997) Standard Test Methods for Impact Testing of Cast Irons
A-327M-91(1997) Standard Test Methods for Impact Testing of Cast Irons (Metric)
A-328/A-328M-03 Standard Specification for Steel Sheet Piling
A-331-95(2000) Standard Specification for Steel Bars, Alloy, Cold-Finished
A-333/A-333M-99 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
A-334/A-334M-99 Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
A-335/A-335M-03 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
A-336/A-336M-03a Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
A-338-84(1998) Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C)
A-340-03a Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
A-341/A-341M-00 Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods
A-342/A-342M-99 Standard Test Methods for Permeability of Feebly Magnetic Materials
A-343/A-343M-03 Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame
A-345-98 Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications
A-348/A-348M-00 Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame
A-350/A-350M-02b Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
A-351/A-351M-03 Standard Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts
A-352/A-352M-03 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
A-353/A-353M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered
A-354-03a Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
A-355-89(2000) Standard Specification for Steel Bars, Alloys, for Nitriding
A-356/A-356M-98(2003) Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
A-358/A-358M-01 Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service
A-363-98 Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
A-367-60(1999) Standard Test Methods of Chill Testing of Cast Iron
A-368-95a(2000) Standard Specification for Stainless Steel Wire Strand
A-369/A-369M-02 Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
A-370-03a Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A-372/A-372M-03 Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
A-376/A-376M-02a Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service
A-377-03 Standard Index of Specifications for Ductile-Iron Pressure Pipe
A-380-99e1 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
A-381-96(2001) Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
A-384/A-384M-02 Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
A-385-03 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
A-387/A-387M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
A-388/A-388M-03 Standard Practice for Ultrasonic Examination of Heavy Steel Forgings
A-389/A-389M-03 Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service
A-390-95(2001) Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
A-391/A-391M-01 Standard Specification for Grade 80 Alloy Steel Chain
A-392-03 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
A-394-00 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
A-395/A-395M-99 Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
A-400-69(2000) Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties
A-401/A-401M-03 Standard Specification for Steel Wire, Chromium-Silicon Alloy
A-403/A-403M-03a Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
A-407-93(1998) Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
A-409/A-409M-01 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
A-411-98 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
A-413/A-413M-01 Standard Specification for Carbon Steel Chain
A-414/A-414M-01 Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels
A-416/A-416M-02 Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
A-417-93(1998) Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units
A-418-99(2003) Standard Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
A-420/A-420M-03 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
A-421/A-421M-02 Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
A-423/A-423M-95(2000) Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
A-424-00 Standard Specification for Steel, Sheet, for Porcelain Enameling
A-426/A-426M-02 Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
A-427-02 Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
A-428/A-428M-01 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
A-434-90a(2000) Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
A-435/A-435M-90(2001) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
A-436-84(2001) Standard Specification for Austenitic Gray Iron Castings
A-437/A-437M-01a Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service
A-439-83(1999) Standard Specification for Austenitic Ductile Iron Castings
A-447/A-447M-93(2003) Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
A-449-00 Standard Specification for Quenched and Tempered Steel Bolts and Studs
A-450/A-450M-03 Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes
A-451/A-451M-02 Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
A-453/A-453M-03 Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels
A-455/A-455M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
A-456/A-456M-99(2003) Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings
A-459-97(2003) Standard Specification for Zinc-Coated Flat Steel Armoring Tape
A-460-94(1999) Standard Specification for Copper-Clad Steel Wire Strand
A-463/A-463M-02a Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
A-466/A-466M-01 Standard Specification for Weldless Chain
A-467/A-467M-01 Standard Specification for Machine and Coil Chain
A-469-94a(1999) Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors
A-470-03 Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
A-471-02 Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
A-472-98(2003) Standard Test Method for Heat Stability of Steam Turbine Shafts and Rotor Forgings
A-473-01 Standard Specification for Stainless Steel Forgings
A-474-98 Standard Specification for Aluminum-Coated Steel Wire Strand
A-475-98 Standard Specification for Zinc-Coated Steel Wire Strand
A-476/A476M-00 Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls
A-478-97(2002) Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
A-479/A-479M-03 Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
A-480/A-480M-03c Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A-481-94(2000) Standard Specification for Chromium Metal
A-482-93(2000) Standard Specification for Ferrochrome-Silicon
A-483-64(2000) Standard Specification for Silicomanganese
A-484/A-484M-03a Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
A-485-03 Standard Specification for High Hardenability Antifriction Bearing Steel
A-487/A-487M-93(2003) Standard Specification for Steel Castings Suitable for Pressure Service
A-488/A-488M-01e1 Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
A-489-03 Standard Specification for Carbon Steel Lifting Eyes
A-490M-03 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]
A-490-02 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
A-491-03 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
A-492-95(2000) Standard Specification for Stainless Steel Rope Wire
A-493-95(2000) Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
A-494/A-494M-03a Standard Specification for Castings, Nickel and Nickel Alloy
A-495-94(2000) Standard Specification for Calcium-Silicon Alloys
A-496-02 Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement
A-497/A-497M-02 Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete
A-498-98 Standard Specification for Seamless and Welded Carbon, Ferritic, and Austenitic Alloy Steel Heat-Exchanger Tubes with Integral Fins
A-499-89(2002) Standard Specification for Steel Bars and Shapes, Carbon Rolled from "T" Rails
A-500-03a Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
A-501-01 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
A-502-03 Standard Specification for Rivets, Steel, Structural
A-503/A-503M-01(2001)e1 Standard Specification for Ultrasonic Examination of Forged Crankshafts
A-504-93(1999) Standard Specification for Wrought Carbon Steel Wheels
A-505-00 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A-506-00 Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
A-507-00 Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
A-508/A-508M-03a Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
A-510-03 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel
A-510M-03 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric]
A-511-96 Standard Specification for Seamless Stainless Steel Mechanical Tubing
A-512-96(2001) Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
A-513-00 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
A-514/A-514M-00a Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
A-515/A-515M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service 




 

      
A-516/A-516M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
A-517/A-517M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
A-518/A-518M-99(2003) Standard Specification for Corrosion-Resistant High-Silicon Iron Castings
A-519-03 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
A-521-03 Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
A-522/A-522M-01 Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
A-523-96(2001) Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
A-524-96(2001) Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
A-529/A-529M-03 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
A-530/A-530M-03 Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
A-531/A-531M-91(2001) Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
A-532/A-532M-93a(2003) Standard Specification for Abrasion-Resistant Cast Irons
A-533/A-533M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
A-534-01 Standard Specification for Carburizing Steels for Anti-Friction Bearings
A-536-84(1999)e1 Standard Specification for Ductile Iron Castings
A-537/A-537M-95(2000) Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
A-539-99 Standard Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines
A-540/A-540M-00 Standard Specification for Alloy-Steel Bolting Materials for Special Applications
A-541/A-541M-95(1999) Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
A-542/A-542M-99e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
A-543/A-543M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
A-550-78(2000) Standard Specification for Ferrocolumbium
A-551-94(1999) Standard Specification for Steel Tires
A-553/A-553M-95(2000) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel
A-554-03 Standard Specification for Welded Stainless Steel Mechanical Tubing
A-555/A-555M-97(2002) Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
A-556/A-556M-96(2001) Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
A-560/A-560M-93(1998) Standard Specification for Castings, Chromium-Nickel Alloy
A-561-71(1999) Standard Recommended Practice for Macrotech Testing of Tool Steel Bars
A-562/A-562M-90(2001) Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
A-563M-03 Standard Specification for Carbon and Alloy Steel Nuts [Metric]
A-563-00 Standard Specification for Carbon and Alloy Steel Nuts
A-564/A-564M-02a Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
A-565-03b Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
A-568/A-568M-03 Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A-571/A-571M-01 Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
A-572/A-572M-03ae1 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
A-573/A-573M-00a Standard Specification for Structural Carbon Steel Plates of Improved Toughness
A-574-00 Standard Specification for Alloy Steel Socket-Head Cap Screws
A-574M-00 Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]
A-575-96(2002) Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
A-576-90b(2000) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
A-577/A-577M-90(2001) Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
A-578/A-578M-96(2001) Standard Specification for Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications
A-579-01 Standard Specification for Superstrength Alloy Steel Forgings
A-580/A-580M-98 Standard Specification for Stainless Steel Wire
A-581/A-581M-95b(2000) Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
A-582/A-582M-95b(2000)e1 Standard Specification for Free-Machining Stainless Steel Bars
A-586-98 Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand and Zinc-Coated Wire for Spun-In-Place Structural Strand
A-587-96(2001) Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
A-588/A-588M-03 Standard Specification for High-Strength Low-Alloy Structural Steel with 50 ksi [345 MPa] Minimum Yield Point to 4-in. [100-mm] Thick
A-589-96(2001) Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe
A-591/A-591M-98 Standard Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight [Mass] Applications
A-592/A-592M-89(1999) Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels
A-595-98(2002) Standard Specification for Steel Tubes, Low-Carbon, Tapered for Structural Use
A-596/A-596M-95(1999) Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
A-597-87(1999) Standard Specification for Cast Tool Steel
A-598/A-598M-02 Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores
A-599/A-599M-02 Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
A-600-92a(1999) Standard Specification for Tool Steel High Speed
A-601-96(2000) Standard Specification for Electrolytic Manganese Metal
A-602-94(1998) Standard Specification for Automotive Malleable Iron Castings
A-603-98(2003) Standard Specification for Zinc-Coated Steel Structural Wire Rope
A-604-93(2003) Standard Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
A-606-01 Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
A-608/A-608M-02 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
A-609/A-609M-91(2002) Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
A-610-79(2000) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
A-612/A-612M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
A-615/A-615M-04 Standard Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement
A-618-01 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
A-623-03 Standard Specification for Tin Mill Products, General Requirements
A-623M-03 Standard Specification for Tin Mill Products, General Requirements [Metric]
A-624/A-624M-98 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
A-625/A-625M-03 Standard Specification for Tin Mill Products, Black Plate, Single Reduced
A-626/A-626M-98 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
A-627-03 Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
A-629-88(1994)e1 Standard Specification for Tool-Resisting Steel Flat Bars and Shapes for Security Applications
A-630-03 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
A-632-02a Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
A-633/A-633M-01 Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
A-635/A-635M-02 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Commercial Steel, Drawing Steel, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, Hot-Rolled, General Requirements for
A-636-76(2000) Standard Specification for Nickel Oxide Sinter
A-638/A-638M-00 Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
A-640-97(2002)e1 Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
A-641/A-641M-98 Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
A-644-98(2003) Standard Terminology Relating to Iron Castings
A-645/A-645M-99a Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated
A-646-95(1999) Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
A-648-95(2000) Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe
A-649/A-649M-99(2003) Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
A-650/A-650M-03 Standard Specification for Tin Mill Products, Black Plate, Double Reduced
A-653/A-653M-03 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
A-656/A-656M-03 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
A-657/A-657M-03 Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
A-659/A-659M-97(2001) Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
A-660-96(2001) Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
A-662/A-662M-03 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A-663/A-663M-89(2000) Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
A-664-99 Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
A-666-03 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
A-667/A-667M-87(2003) Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders
A-668/A-668M-03 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
A-671-96(2001) Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
A-672-96(2001) Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
A-673/A-673M-02 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
A-674-00 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
A-675/A-675M-03 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
A-677/A-677M-99 Standard Specification for Nonoriented Electrical Steel Fully Processed Types
A-678/A-678M-00a Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates
A-679/A-679M-00 Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
A-681-94(1999) Standard Specification for Tool Steels Alloy
A-682/A-682M-02 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For
A-683/A-683M-99 Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types
A-684/A-684M-86(2002) Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
A-686-92(1999) Standard Specification for Tool Steel, Carbon
A-688/A-688M-03 Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes
A-689-97(2002) Standard Specification for Carbon and Alloy Steel Bars for Springs
A-690/A-690M-00a Standard Specification for High-Strength Low-Alloy Steel H-Piles and Sheet Piling for Use in Marine Environments
A-691-98(2002) Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
A-693-03 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A-694/A-694M-03 Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
A-696-90a(2000) Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
A-697/A-697M-03 Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
A-698/A-698M-02 Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
A-700-99e1 Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Domestic Shipment
A-701-96(2000) Standard Specification for Ferromanganese-Silicon
A-702-89(2000) Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought
A-703/A-703M-03 Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
A-704/A-704M-01 Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
A-705/A-705M-95(2000) Standard Specification for Age-Hardening Stainless Steel Forgings
A-706/A-706M-04 Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
A-707/A-707M-02 Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
A-709/A-709M-03a Standard Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges
A-710/A-710M-02 Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
A-711-03 Standard Specification for Steel Forging Stock
A-712-97(2002) Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys
A-713-93(1998) Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
A-714-99(2003) Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
A-716-03 Standard Specification for Ductile Iron Culvert Pipe
A-717/A-717M-01 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
A-719/A-719M-02 Standard Test Method for Lamination Factor of Magnetic Materials
A-720/A-720M-02 Standard Test Method for Ductility of Nonoriented Electrical Steel
A-721/A-721M-02 Standard Test Method for Ductility of Oriented Electrical Steel
A-722/A-722M-98(2003) Standard Specification for Uncoated High-Strength Steel Bar for Prestressing Concrete
A-723/A-723M-02 Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
A-724/A-724M-99 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels
A-726-00 Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types
A-727/A-727M-02 Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
A-729-93(1999) Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
A-730-93(1999) Standard Specification for Forgings, Carbon and Alloy Steel, for Railway Use
A-732/A-732M-02 Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
A-733-03 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
A-734/A-734M-87a(2003) Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered
A-735/A-735M-03 Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service
A-736/A-736M-03 Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel
A-737/A-737M-99 Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
A-738/A-738M-03a Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A-739-90a(2000) Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
A-740-98(2003) Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
A-741-98(2003) Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail
A-742/A-742M-03 Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
A-743/A-743M-03 Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
A-744/A-744M-00e1 Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
A-745/A-745M-94(2003) Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings
A-746-03 Standard Specification for Ductile Iron Gravity Sewer Pipe
A-747/A-747M-99 Standard Specification for Steel Castings, Stainless, Precipitation Hardening
A-748/A-748M-87(2003) Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use
A-749/A-749M-97(2002) Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
A-750-77(1994)e1 Standard Specification for Steel Air Ventilating Grille Units for Detention Areas
A-751-01 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
A-752-93(2003) Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel
A-752M-93(2003) Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric]
A-753-02 Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)
A-754/A-754M-96(2000) Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
A-755/A-755M-01 Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
A-756-94(2001) Standard Specification for Stainless Anti-Friction Bearing Steel
A-757/A-757M-00 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
A-758/A-758M-00 Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
A-759-00 Standard Specification for Carbon Steel Crane Rails
A-760/A-760M-01a Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
A-761/A-761M-03 Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
A-762/A-762M-00 Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
A-763-93(1999)e1 Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
A-764-95(2001) Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
A-765/A-765M-01 Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
A-767/A-767M-00b Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
A-768-95(2001) Standard Specification for Vacuum-Treated 12% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts
A-769/A-769M-00 Standard Specification for Carbon and High-Strength Electric Resistance Welded Steel Structural Shapes
A-770/A-770M-03 Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
A-771/A-771M-95(2001) Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-Cooled Reactor Core Components
A-772/A-772M-00 Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current
A-773/A-773M-01 Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
A-774/A-774M-02 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
A-775/A-775M-01 Standard Specification for Epoxy-Coated Reinforcing Steel Bars
A-778-01 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
A-779/A-779M-00 Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete
A-780-01 Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
A-781/A-781M-03a Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A-782/A-782M-90(2001) Standard Specification for Pressure-Vessel Plates, Quenched-and-Tempered, Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel
A-786/A-786M-00b Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
A-787-01 Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
A-788-03a Standard Specification for Steel Forgings, General Requirements
A-789/A-789M-02a Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
A-790/A-790M-03 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
A-792/A-792M-03 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
A-793-96(2001) Standard Specification for Rolled Floor Plate, Stainless Steel
A-794-97(2002) Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16% Maximum to 0.25% Maximum), Cold-Rolled
A-795-00 Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
A-796/A-796M-03 Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
A-798/A-798M-01 Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
A-799/A-799M-92(2002) Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
A-800/A-800M-01 Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof
A-801/A-801M-99 Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys UNS R30005 and K92650
A-802/A-802M-95(2001) Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
A-803/A-803M-03 Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes
A-804/A-804M-99 Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens
A-805-93(2002) Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
A-807/A-807M-02e1 Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
A-808/A-808M-00a Standard Specification for High-Strength, Low-Alloy Carbon, Manganese, Columbium, Vanadium Steel of Structural Quality with Improved Notch Toughness
A-809-98 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
A-810-01 Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
A-811-03 Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques
A-813/A-813M-01 Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
A-814/A-814M-03 Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
A-815/A-815M-01a Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
A-817-03 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
A-818-91(2001) Standard Specification for Coppered Carbon Steel Wire
A-820-01 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
A-821/A-821M-99 Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Tanks
A-822-90(2000) Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
A-823-99(2003) Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
A-824-01 Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
A-826/A-826M-95(2001) Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Duct Tubes for Liquid Metal-Cooled Reactor Core Components
A-827/A-827M-02 Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications
A-829/A-829M-00 Standard Specification for Alloy Structural Steel Plates
A-830/A-830M-02 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
A-831/A-831M-95(2000) Standard Specification for Austenitic and Martensitic Stainless Steel Bars, Billets, and Forgings for Liquid Metal Cooled Reactor Core Components
A-832/A-832M-99e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
A-833-84(2001) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
A-834-95(2001) Standard Specification for Common Requirements for Iron Castings for General Industrial Use
A-835-84(2000) Standard Specification for Sizes of Ferroalloys and Alloy Additives
A-836/A-836M-02 Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
A-837/A-837M-03 Standard Specification for Steel Forgings, Alloy, for Carburizing Applications
A-838-02 Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications
A-839-02 Standard Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications
A-840/A-840M-00 Standard Specification for Fully Processed Magnetic Lamination Steel
A-841/A-841M-03a Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)
A-842-85(1997) Standard Specification for Compacted Graphite Iron Castings
A-844/A-844M-93(1999) Standard Specification for Steel Plates, 9% Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process
A-845-85(2000) Standard Specification for Titanium Scrap for Use in Deoxidation and Alloying of Steel
A-846-85(2000) Standard Specification for Aluminum Scrap for Use in Deoxidation and Alloying of Steel
A-847-99a(2003) Standard Specification for Cold-Formed Welded and Seamless High Strength, Low Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
A-848-01 Standard Specification for Low-Carbon Magnetic Iron
A-849-00 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
A-852/A-852M-03 Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick
A-853-93(2003) Standard Specification for Steel Wire, Carbon, for General Use
A-854/A-854M-98(2003) Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
A-855/A-855M-98 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
A-856/A-856M-98 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
A-857/A-857M-00a Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage
A-858/A-858M-00 Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
A-859/A-859M-02 Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
A-860/A-860M-00 Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings
A-861-02 Standard Specification for High-Silicon Iron Pipe and Fittings
A-862/A-862M-98 Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
A-865-03 Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
A-866-01 Standard Specification for Medium Carbon Anti-Friction Bearing Steel
A-867-03 Standard Specification for Iron-Silicon Relay Steels
A-871/A-871M-03 Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
A-872/A-872M-02 Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
A-874/A-874M-98 Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service
A-875/A-875M-02a Standard Specification for Steel Sheet, Zinc-5% Aluminum Alloy-Coated by the Hot-Dip Process
A-876-03 Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types
A-877/A-877M-99 Standard Specification for Steel Wire, Chromium-Silicon Alloy Valve Spring Quality
A-878/A-878M-99 Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
A-879-00 Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A-880-95 Standard Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys
A-881/A-881M-02 Standard Specification for Steel Wire, Deformed, Stress-Relieved or Low-Relaxation for Prestressed Concrete Railroad Ties
A-882/A-882M-02a Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand
A-883/A-883M-01 Standard Test Method for Ferrimagnetic Resonance Linewidth and Gyromagnetic Ratio of Nonmetallic Magnetic Materials
A-884/A-884M-02 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Fabric for Reinforcement
A-885/A-885M-96(2002) Standard Specification for Steel Sheet, Zinc and Aramid Fiber Composite Coated for Corrugated Steel Sewer, Culvert, and Underdrain Pipe
A-886/A-886M-02 Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
A-887-89(2000) Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application
A-888-03 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
A-889/A-889M-03 Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Inductions Using the Wattmeter-Varmeter-Ammeter-Voltmeter Method and 25-cm (250-mm) Epstein Frame
A-890/A-890M-99(2003) Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
A-891-98(2003) Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels
A-892-88(2001) Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels
A-893/A-893M-03 Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
A-894/A-894M-00 Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials
A-895-89(2000) Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip
A-896-89(1999) Standard Practice for Conducting Case Studies on Galvanized Structures
A-897/A-897M-03 Standard Specification for Austempered Ductile Iron Castings
A-898/A-898M-91(2001) Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
A-899-91(2002) Standard Specification for Steel Wire, Epoxy-Coated
A-900/A-900M-01 Standard Test Method for Lamination Factor of Amorphous Magnetic Strip
A-901-03 Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
A-902-03 Standard Terminology Relating to Metallic Coated Steel Products
A-903/A-903M-99(2003) Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
A-904-98 Standard Specification for 50 Nickel-50 Iron Powder Metallurgy (P/M) Soft Magnetic Alloys
A-905-93(1998) Standard Specification for Steel Wire, Pressure Vessel Winding
A-906/A906M-02 Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
A-908-03 Standard Specification for Stainless Steel Needle Tubing
A-909-03 Standard Specification for Steel Forgings, Microalloy, for General Industrial Use
A-910/A-910M-99 Standard Specification for Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete
A-911/A-911M-02 Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties
A-912-93(1998) Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens
A-913/A-913M-03 Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)
A-914/A-914M-92(1999)e1 Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements
A-915/A-915M-93(2003) Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
A-917-00 Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
A-918-00 Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A-920/A-920M-02a Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
A-921/A-921M-93(1999) Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
A-922-93(2000) Standard Specification for Silicon Metal
A-923-03 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels
A-924/A-924M-99 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
A-925-98 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
A-926-03 Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe
A-927/A-927M-99 Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
A-928/A-928M-00 Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
A-929/A-929M-01 Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
A-930-03 Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
A-931-96(2002) Standard Test Method for Tension Testing of Wire Ropes and Strand
A-932/A-932M-01 Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens
A-933/A-933M-95(2001) Standard Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement
A-934/A-934M-03 Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
A-937/A-937M-01 Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
A-938-97(2003) Standard Test Method for Torsion Testing of Wire
A-939-96(2001) Standard Test Method for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings
A-940-96(2001) Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors
A-941-03 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
A-942-95(2001) Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion- Resistant Roll Shells
A-943/A-943M-01 Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
A-944-99 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
A-945/A-945M-00 Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
A-946-95(2000) Standard Specification for Chromium, Chromium-Nickel and Silicon Alloy Steel Plate, Sheet, and Strip for Corrosion and Heat Resisting Service
A-947M-95(2000) Standard Specification for Textured Stainless Steel Sheet [Metric]
A-949/A-949M-01 Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
A-950/A-950M-99(2003) Standard Specification for Fusion Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
A-951-02 Standard Specification for Masonry Joint Reinforcement
A-952/A-952M-02 Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
A-953-02 Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Tubing
A-954-02 Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Pipe
A-955/A-955M-03b Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement
A-956-02 Standard Test Method for Leeb Hardness Testing of Steel Products
A-957-03 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A-958-00 Standard Specification for Steel Castings, Carbon, and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
A-959-03 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
A-960-03 Standard Specification for Common Requirements for Wrought Steel Piping Fittings
A-961-02 Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
A-962/A-962M-03 Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range
A-964/A-964M-02 Standard Specification for Corrugated Steel Box Culverts
A-965/A-965M-02 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
A-966/A-966M-96(2001) Standard Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current
A-967-01e1 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
A-968/A-968M-96(2001) Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service
A-970/A-970M-98 Standard Specification for Welded or Forged Headed Bars for Concrete Reinforcement
A-971-00 Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils
A-972/A-972M-00 Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
A-973/A-973M-01 Standard Specification for Grade 100 Alloy Steel Chain
A-974-97(2003) Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
A-975-97(2003) Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
A-976-03 Standard Classification of Insulating Coatings by Composition, Relative Insulating Ability and Application
A-977/A-977M-02 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
A-978/A-978M-97(2002)e1 Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
A-979/A-979M-03 Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
A-980-97(2003) Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
A-981-97(2002) Standard Test Method for Evaluating Bond Strength for 15.2 mm (0.6 in.) Diameter Prestressing Steel Strand, Grade 270, Uncoated, Used in Prestressed Ground Anchors
A-982-02 Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
A-983/A-983M-01 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
A-984/A-984M-03 Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded
A-985/A-985M-03 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
A-986/A-986M-01 Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
A-987-00 Standard Test Method for Measuring Shape Characteristics of Tin Mill Products
A-988-98(2002) Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
A-989-98(2002) Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
A-990-03 Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
A-991/A-991M-98 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
A-992/A-992M-03 Standard Specification for Structural Steel Shapes
A-993-98 Standard Test Method for Dynamic Tear Testing of Cast Irons to Establish Transition Temperature
A-994-03 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
A-995/A995M-98(2003) Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
A-996/A-996M-03b Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
A-997-98(2003) Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
A-998/A-998M-98 Standard Practice for Structural Design of Reinforcements for Fittings in Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
A-999/A-999M-01 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
A-1000-99 Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
A-1001-01 Standard Specification for High Strength Steel Castings in Heavy Sections
A-1002-99(2003) Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
A-1003/A-1003M-02a Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
A-1004/A-1004M-99 Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members



Certificate & Inspection : c/w Calibration Works Certificate EN10204 3.1/DIN 50049 3.1/ISO 10474 Mill Test Report, NACE MR-01-03/NACE MR-01-75/ISO-15156, CE Marked, European Pressure Equipment Directive PED 97/23/EC, AD 2000-WO, ASME Boiler & Pressure Vessel Code Section-II Part-A Edition 2008, API 6A, with 3.2 certificate duly certified & approved by LRS-Lloyd's Register, GL-Germanischer Lloyd, BV-Bureau Veritas, DNV-Det Norske Veritas, ABS-American Bureau of Shipping, SGS, TUV, RINA, IRS (Indian Register of Shipping), Class NK (Nippon Kaiji Kyokai), KR (Korean Register of Shipping), NORSOK APPROVED STANDARD M630, M650 Rev.3
 

Regards,
 

CONTACT PERSON :

 

 

MUKESH SHAH
Director
Mobile No. 0091 - 9820292499
Email -
marketing@rolexmetals.com


ROLEX METAL DISTRIBUTORS
( A METAL & STEEL Company )
57-A, KHATARGALLI,
THAKURDWAR,
MUMBAI - 400002, INDIA.
TEL.No. 0091-22-23858802
TEL.No. 0091-22-23823963
FAX No. 0091-22-23898724
Email -
marketing@rolexmetals.com
Website –
www.rolexmetals.com

 
 

CHAIRMAN – chairman@rolexmetals.com

MANAGING DIRECTOR – managingdirector@rolexmetals.com

TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com

SALES DIRECTOR – salesdirector@rolexmetals.com

COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com

 

COMMERCIAL MANAGER – commercial@rolexmetals.com

GENERAL MANAGER – generalmanager@rolexmetals.com

SALES MANAGER – salesmanager@rolexmetals.com

PURCHASE MANAGER – purchasemanager@rolexmetals.com

TECHNICAL MANAGER – technical@rolexmetals.com

WORKS MANAGER – worksmanager@rolexmetals.com

STORES MANAGER – stores@rolexmetals.com

WAREHOUSE MANAGER – warehouse@rolexmetals.com

SALES DOMESTIC – salesdomestic@rolexmetals.com

SALES INTERNATIONAL – salesinternational@rolexmetals.com

SALES GENERAL – sales@rolexmetals.com

PURCHASE GENERAL – purchase@rolexmetals.com

FINANCE MANAGER – finance@rolexmetals.com

ACCOUNTS MANAGER – accounts@rolexmetals.com

GENERAL INFORMATION – info@rolexmetals.com

 

EXPORT MANAGER – export@rolexmetals.com

IMPORT MANAGER – import@rolexmetals.com

AIR EXPORT – airexport@rolexmetals.com

SEA EXPORT – seaexport@rolexmetals.com

CUSTOMS – customs@rolexmetals.com

 

AIR FREIGHT – airfreight@rolexmetals.com

SEA FREIGHT – seafreight@rolexmetals.com

DESPATCH – despatch@rolexmetals.com

INSPECTION – inspection@rolexmetals.com

LOGISTICS – logistics@rolexmetals.com

TRANSPORT – transport@rolexmetals.com

 

KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com

TALOJA WAREHOUSE – taloja@rolexmetals.com

KHOPOLI WAREHOUSE – khopoli@rolexmetals.com

NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com

KANDLA WAREHOUSE – kandla@rolexmetals.com

MUMBAI WAREHOUSE – mumbai@rolexmetals.com

STOCKYARD – stockyard@rolexmetals.com

 

SERVICE – service@rolexmetals.com

SUPPORT – support@rolexmetals.com

RECRUITMENT – career@rolexmetals.com

WEBMASTER – webmaster@rolexmetals.com

CUSTOMER CARE – customercare@rolexmetals.com