THREADED RODS / STUDS / BOLTS / NUTS / SCREWS / WASHERS
ASME SA193 Grade B7, Grade B7M, Grade B16, ASTM A193 Grade B7/B7M/B16
ASME SA193 Grade B5, Grade B6, Grade B6X, ASTM A193 Grade B5/B6/B6X
ASME SA320 Grade L7, Grade L7M, Grade L43, ASTM A320 Grade L7, L7M, L43
ASME SA194 Grade 2H, Grade 2HM, Grade 3, Grade 4, Grade 7, Grade 7M, Grade 16
ASTM A194 Grade 2H, 2HM, 3, 4, 7, 7M, 16
ASME SA193 Grade B8, Grade B8M, Grade B8 Class 2, Grade B8M Class 2
ASTM A193 Grade B8, B6M, B8 Class 2, B8M Class 2
ASME SA320 Grade B8, Grade B8M, Grade B8 Class 2, Grade B8M Class 2
ASTM A320 Grade B8, B8M, B8 Class 2, B8M Class 2
ASTM F1554 Grade 36, Grade 55, Grade 105 KSI Yield Strength Anchor Foundation Bolts
ASTM F1554 Grade-36, Grade-55, Grade-105 KSI Anchor Bolt for Concrete Foundations
High Tensile Bolts Grade 8.8, High Tensile Bolts Grade 10.9, High Tensile Bolts Grade 12.9
High Tensile Nuts Grade 8, High Tensile Nuts Grade 10, High Tensile Nuts Grade 12
ISO 898-1 Bolts, Screws, Studs Property Class / Grade 4.6, 4.8, 5.6, 5.8, 6.8, 8.8, 9.8, 10.9, 12.9
ISO 898-1 Bolt, Screw, Stud Property Class / Grade 4.6, 4.8, 5.6, 5.8, 6.8, 8.8, 9.8, 10.9, 12.9
ISO 898-2 Nuts Property Class / Grade 6, 8, 9, 10, 12 with specified Proof Load Value
ISO 898-2 Nut Property Class / Grade 6, 8, 9, 10, 12 with specified Proof Load Value
ISO 898-5 Screws, Threaded Fasteners Property Class / Grade 14H, 22H, 33H, 45H
ISO 898-5 Screw, Threaded Fastener Property Class / Grade 14H, 22H, 33H, 45H
ISO 898-6 Nuts Property Class / Grade 5, 6, 8, 10, 12 with specified Proof Load Value
ISO 898-6 Nut Property Class / Grade 5, 6, 8, 10, 12 with specified Proof Load Value
ISO 898-7 Bolts, Screws Property Class / Grade 8.8, 9.8, 10.9, 12.9
ISO 898-7 Bolt, Screw Property Class / Grade 8.8, 9.8, 10.9, 12.9
ASTM A453 / ASTM A453M Grade 660 UNS S66286 Class A, Class B, Class C, Class D
ASTM A453 / ASTM A453M Grade 651 UNS S63198 Class A, Class B
ASTM A453 / ASTM A453M Grade 662 UNS S66220 Class A, Class B
ASTM A453 / ASTM A453M Grade 665 UNS S66545 Class A, Class B
ASTM A453 / ASTM A453M Grade 668 UNS S66285 Class A, Class B
ASTM A540 / ASTM A540M Grade B21 (Cr-Ni-V) Class 1, Class 2, Class 3, Class 4, Class 5
ASTM A540 / ASTM A540M Grade B22 (4142-H) Class 1, Class 2, Class 3, Class 4, Class 5
ASTM A540 / ASTM A540M Grade B23 (E-4340-H) Class 1, Class 2, Class 3, Class 4, Class 5
ASTM A540 / ASTM A540M Grade B24 (4340 Mod.) Class 1, Class 2, Class 3, Class 4, Class 5
ASTM A540 / ASTM A540M Grade B24V (4340V Mod.) Class 1, Class 2, Class 3
ASTM A437 / ASTM A437M Grade B4B, Grade B4C, Grade B4D
ASTM A307, ASTM A307M, ASME SA307, ASME SA307M, ASTM A325, ASTM A325M, ASME SA325,
ASME SA325M, ASTM A354, ASTM A354M, ASME SA354, ASME SA354M, ASTM A394, ASTM A394M,
ASME SA394, ASME SA394M, ASTM A449, ASTM A449M, ASME SA449, ASME SA449M, ASTM A490,
ASTM A490M, ASME SA490, ASME SA490M BOLTS, STUDS, SCREWS
ASTM A563, ASTM A563M Grade O, A, B, C, D, DH, DH3 Carbon Steel & Alloy Steel Nuts
ASME SA563, ASME SA563M Grade O, A, B, C, D, DH, DH3 Carbon Steel & Alloy Steel Nuts
ASTM F436, ASTM F436M Type-1, Type-3 Hardened Steel Washers

ASME SA307 Grade A, B, C Carbon Steel Bolts and Studs 60000 PSI Tensile Strength
ASTM A307 Grade A, B, C Carbon Steel Bolts and Studs 60,000 PSI Tensile Strength
ASME SA194 Grade 8, Grade 8M, Grade 8F, Grade 8A, Grade 8C, Grade 6, Grade 310
ASTM A194 Grade 8, 8M, 8F, 8A, 8C, 6, 310
Stainless Steel Carbide Solution Treated & Strain Hardened Threaded Bar, Rod, Stud
Roll Threading Bar, Roll Threading Rod, Roll Threading Stud
Stainless Steel Austenitic Fasteners Grade A1 (AISI 303) A2 (AISI 304), A4 (AISI 316)
Fasteners 303 A1-50, A1-70, A1-80, 304 A2-50, A2-70, A2-80, 316 A4-50, A4-70, A4-80

Threaded Rods / Threaded Bars DIN 975, Stud Bolts DIN 976
Hexagon Bolts DIN 601, DIN 931, DIN 933, Hexagon Nuts DIN 555, DIN 934
SOCKET HEAD CAP SCREWS, FLAT HEAD SOCKET SCREWS, BUTTON HEAD CAP SCREWS
SOCKET HEAD SHOULDER SCREWS, SQUARE HEAD SET SCREWS, SOCKET SET SCREWS
LOW HEAD CAP SCREWS, SELF DRILLING SCREWS, SOCKET COUNTERSUNK HEAD SCREWS
HEX KEYS / HEXAGON SOCKET KEYS, PRESSURE PLUGS, DOWEL PINS, PULL-OUT DOWEL PINS
D.T.I Washers, Direct Tension Indicator, Direct Tensions Indicators, Load Indicating Washers
DTI Washers, DTI Compressible Washer, Load Indicator Washers, Direct Tension Indicating Washer
D.T.I Washer, ASTM F959 DTI Washer, ASTM F959M DTI Washer, ASTM F959 Type 325 DTI Washer
ASTM F959 Type 490 DTI Washer, ASTM F959 Type 325 D.T.I Washer, ASTM F959 Type 490 D.T.I Washer
Plain Washer DIN 125, Stud Metal End DIN 938, DIN 939, DIN 940
Flat Plain Washers, Square Flat Washers, Punch Washers, Taper Washers, Machine Washers
Conical Washers, Doubled Coiled Spring Washers, Spring Lock Washers, Spring Washers
Wave Spring Washers, Serrated Safety Washers (RIB Washers), Cylinderical Curved Washers

Property Class : 4.6, 4.8, 5.6, 5.8, 6.8, 8.8, 9.8, 10.9, 12.9
Make : UNBRAKO, CAPARO, TVS, LPS, UNK High Tensile Bolts, Screws & Nuts
Coatings : Bright Zinc Plating, Hot Dip Galvanising, Phosphatided, Nickel Plating BZP Cr3
Coatings : Yellow Zinc Plating, Blue Zinc Plating, White Zinc Plating, Black Oxide BZP CR+3
Coatings : Cadmium Plating - Silver, Cadmium Plating - Yellow, XYLAN / PTFE, Fluoropolymer
Coatings : PTFE Coatings, Fluropolymer Coatings, XYLAN Coatings, Molybdenum Disulfide Coatings
Coatings : Epoxy Coatings, Phenolic Coatings, Phosphate Coatings, Polyurethane Coatings
Coatings : Inorganic Zinc Coatings, Polyphenylene Sulfide / Kyton Coatings, FEP Coatings
Coatings : PVDF & Kynar Coatings, ECTFE / HALAR Coatings, Ceramic Epoxy Coatings
Coatings : TEFLON Coatings, PTFE TEFLON Coatings, HDG Hot Dip Galvanized Coatings
Coatings : Cadmium Plating - Silver, Cadmium Plating - Yellow, XYLAN / PTFE, Fluoropolymer
Treatments : Annealing, Solution Annealing, Normalizing, Blackodizing, Phosphating, Nitriding
Cold Heading Quality Wires for Fasteners - CHQ HB, HHB, SAE 1006, SAE 1008, SAE 1010
Cold Heading Quality Wires for Fasteners - CHQ SAE 1015, SAE 1018, SAE 1020, EN8, EN8D
Cold Heading Quality Wires for Fasteners - CHQ SAE 1541, SAE 1035, EN5K, 50CrV4, EN45, EN47
Cold Heading Quality Wires for Fasteners - CHQ SUP7,SUP9, SUP11, EN19, SAE 4135, SAE 4140
Cold Heading Quality Wires for Fasteners - CHQ SCM 435, SCM 440, EN18, 40Cr4, SAE 10B21
Cold Heading Quality Wires for Fasteners - CHQ SAE 15B25, SAE 15B41, SAE 10B35, 19MnB4M
Material : Nickel, Monel, Inconel, Incoloy, Hastelloy, Titanium, Alloy 904L, SMO254, Alloy 20, Sanicro 28
Material : Duplex 2205 UNS S32205 UNS S31803 ASTM A182 F51 F60, Duplex 329 ASTM A182 F52
Material : Super Duplex 2507 UNS S32750 ASTM A182 F53, UNS S32760 ASTM A182 F55 Din 1.4501
Material : 22CrMo4, 24CrMo4, 25CrMo4, 26CrMo4, 34CrMo4, 42CrMo4, 34CrNiMo6, 41CrNiMo6
Material : AISI 4130, SAE 4130, AISI 4140, SAE 4140, AISI 4145, SAE 4145, AISI 4340, SAE 4340
Material : EN8, EN9, EN19, EN24 Condition : Normalized, Tempered, Quenched & Tempered


ASTM A193 / ASTM A193M Alloy Steel & Stainless Steel Bolting Materials for High-Temperature Service

 

ASTM A193 / ASTM A193M Grade B5 (AISI 501)

ASTM A193 / ASTM A193M Grade B6, B6X (AISI 410)

ASTM A193 / ASTM A193M Grade B7, B7M (AISI 4140, AISI 4142, AISI 4145, AISI 4140H, AISI 4142H, AISI 4145H

ASTM A193 / ASTM A193M Grade B16

ASTM A193 / ASTM A193M Grade B8, B8A (AISI 304, AISI 304L, AISI 304H)

ASTM A193 / ASTM A193M Grade B8C, B8CA (AISI 347, AISI 347H)

ASTM A193 / ASTM A193M Grade B8M, B8MA, B8M2, B8M3 (AISI 316, AISI 316L, AISI 316H)

ASTM A193 / ASTM A193M Grade B8P, B8PA (AISI 305)

ASTM A193 / ASTM A193M Grade B8N, B8NA (AISI 304N)

ASTM A193 / ASTM A193M Grade B8MN, B8MNA (AISI 316N)

ASTM A193 / ASTM A193M Grade B8MLCuN, B8MLCuNA

ASTM A193 / ASTM A193M Grade B8T, B8TA (AISI 321, AISI 321H)

ASTM A193 / ASTM A193M Grade B8A, B8RA

ASTM A193 / ASTM A193M Grade B8S, B8SA

ASTM A193 / ASTM A193M Grade B8LN, B8LNA (AISI 304N, AISI 304LN)

ASTM A193 / ASTM A193M Grade B8MLN, B8MLNA (AISI 316N, AISI 316LN)

 

 

 

ASME SA193 / ASME SA193M Alloy Steel & Stainless Steel Bolting Materials for High-Temperature Service

 

ASME SA193 / ASME SA193M Grade B5 (AISI 501)

ASME SA193 / ASME SA193M Grade B6, B6X (AISI 410)

ASME SA193 / ASME SA193M Grade B7, B7M (AISI 4140, AISI 4142, AISI 4145, AISI 4140H, AISI 4142H, AISI 4145H

ASME SA193 / ASME SA193M Grade B16

ASME SA193 / ASME SA193M Grade B8, B8A (AISI 304, AISI 304L, AISI 304H)

ASME SA193 / ASME SA193M Grade B8C, B8CA (AISI 347, AISI 347H)

ASME SA193 / ASME SA193M Grade B8M, B8MA, B8M2, B8M3 (AISI 316, AISI 316L, AISI 316H)

ASME SA193 / ASME SA193M Grade B8P, B8PA (AISI 305)

ASME SA193 / ASME SA193M Grade B8N, B8NA (AISI 304N)

ASME SA193 / ASME SA193M Grade B8MN, B8MNA (AISI 316N)

ASME SA193 / ASME SA193M Grade B8MLCuN, B8MLCuNA

ASME SA193 / ASME SA193M Grade B8T, B8TA (AISI 321, AISI 321H)

ASME SA193 / ASME SA193M Grade B8A, B8RA

ASME SA193 / ASME SA193M Grade B8S, B8SA

ASME SA193 / ASME SA193M Grade B8LN, B8LNA (AISI 304N, AISI 304LN)

ASME SA193 / ASME SA193M Grade B8MLN, B8MLNA (AISI 316N, AISI 316LN)

 

ASTM A194 / ASTM A194M Carbon Steel, Alloy Steel & Stainless Steel Nuts for  Bolts for High-Pressure & High-Temperature Service

 

ASTM A194 / ASTM A194M Grade 1 (Carbon Steel)

ASTM A194 / ASTM A194M Grade 2, Grade 2HM, Grade 2H (Carbon Steel)

ASTM A194 / ASTM A194M Grade 4 (Carbon Molybdenum Steel)

ASTM A194 / ASTM A194M Grade 3 (AISI 501)

ASTM A194 / ASTM A194M Grade 6 (AISI 410)

ASTM A194 / ASTM A194M Grade 6F (AISI 416)

ASTM A194 / ASTM A194M Grade 7, Grade 7M (AISI 4140, AISI 4142, AISI 4145, AISI 4140H, AISI 4142H, AISI 4145H)

ASTM A194 / ASTM A194M Grade 8, Grade 8A (AISI 304, AISI 304L, AISI 304H)

ASTM A194 / ASTM A194M Grade 8C, Grade 8CA (AISI 347, AISI 347H)

ASTM A194 / ASTM A194M Grade 8M, Grade 8MA (AISI 316, AISI 316L, AISI 316H)

ASTM A194 / ASTM A194M Grade 8T, Grade 8TA (AISI 321, AISI 321H)

ASTM A194 / ASTM A194M Grade 8F, Grade 8FA (AISI 303)

ASTM A194 / ASTM A194M Grade 8P, Grade 8PA (AISI 305)

ASTM A194 / ASTM A194M Grade 8N, Grade 8NA (AISI 304N)

ASTM A194 / ASTM A194M Grade 8LN, Grade 8LNA (AISI 304LN)

ASTM A194 / ASTM A194M Grade 8MN, Grade 8MNA (AISI 316N)

ASTM A194 / ASTM A194M Grade 8MLN, Grade 8MLNA (AISI 316LN)

ASTM A194 / ASTM A194M Grade 8R, Grade 8RA (XM19 Nitronic-50)

ASTM A194 / ASTM A194M Grade 8S, Grade 8SA

ASTM A194 / ASTM A194M Grade 8MLCuN, Grade 8MLCuNA (UNS S31254 SMO254)

ASTM A194 / ASTM A194M Grade 16 (Chromium Molybdenum Vanadium Steel)

 

 

 

ASME SA194 / ASME SA194M Carbon Steel, Alloy Steel & Stainless Steel Nuts for  Bolts for High-Pressure & High-Temperature Service

 

ASME SA194 / ASME SA194M Grade-1 (Carbon Steel)

ASME SA194 / ASME SA194M Grade-2, Grade-2HM, Grade-2H (Carbon Steel)

ASME SA194 / ASME SA194M Grade-4 (Carbon Molybdenum Steel)

ASME SA194 / ASME SA194M Grade-3 (AISI 501)

ASME SA194 / ASME SA194M Grade-6 (AISI 410)

ASME SA194 / ASME SA194M Grade-6F (AISI 416)

ASME SA194 / ASME SA194M Grade-7, Grade-7M (AISI 4140, AISI 4142, AISI 4145, AISI 4140H, AISI 4142H, AISI 4145H)

ASME SA194 / ASME SA194M Grade-8, Grade-8A (AISI 304, AISI 304L, AISI 304H)

ASME SA194 / ASME SA194M Grade-8C, Grade-8CA (AISI 347, AISI 347H)

ASME SA194 / ASME SA194M Grade-8M, Grade-8MA (AISI 316, AISI 316L, AISI 316H)

ASME SA194 / ASME SA194M Grade-8T, Grade-8TA (AISI 321, AISI 321H)

ASME SA194 / ASME SA194M Grade-8F, Grade-8FA (AISI 303)

ASME SA194 / ASME SA194M Grade-8P, Grade-8PA (AISI 305)

ASME SA194 / ASME SA194M Grade-8N, Grade-8NA (AISI 304N)

ASME SA194 / ASME SA194M Grade-8LN, Grade-8LNA (AISI 304LN)

ASME SA194 / ASME SA194M Grade-8MN, Grade-8MNA (AISI 316N)

ASME SA194 / ASME SA194M Grade-8MLN, Grade-8MLNA (AISI 316LN)

ASME SA194 / ASME SA194M Grade-8R, Grade-8RA (XM19 Nitronic-50)

ASME SA194 / ASME SA194M Grade-8S, Grade-8SA

ASME SA194 / ASME SA194M Grade-8MLCuN, Grade-8MLCuNA (UNS S31254 SMO254)

ASME SA194 / ASM A194M Grade-16 (Chromium Molybdenum Vanadium Steel)

 

DIN 906 - Hexagon Socket Pipe Plugs

DIN 908 - Hexagon Socket Screw Plugs

DIN 910 - Hexagon Head Screw Plugs

DIN 911 - Hexagon Socket Screw Keys

DIN 912 - Socket Head Cap Screws

DIN 913 - Socket Set Screws with Flat Point

DIN 914 - Socket Set Screws with Cone Point

DIN 915 - Socket Set Screws with Dog Point

DIN 916 - Socket Set Screws with Cup Point

DIN 917 - Hexagon Cup Nuts - Low Pattern

DIN 920 - Slotted Pan Head Screws, Small Head

DIN 923 - Slotted Pan Head Screws with Shoulder

DIN 927 - Slotted Shoulder Screws

DIN 928 - Square Weld Nuts

DIN 929 - Hexagon Weld Nuts

DIN 931 - Hexagon Cap Screws Partially Threaded

DIN 933 - Hexagon Cap Screws Fully Threaded

DIN 933 Sz - Hexagon Cap Screws with Slot

DIN 934 - Hexagon Nuts - 0,8d

DIN 935 - Castle Nuts

DIN 936 - Hexagon Jam Nuts

DIN 937 - Hexagon Thin Slotted and Castle Nuts

DIN 939 - Studs, Tap End - 1,25d

DIN 960 - Hex Cap Screws, Metric Fine Thread - Part Thread

DIN 961 - Hex Cap Screws, Metric Fine Thread - Full Thread

DIN 963 A- Slotted Flat Head Machine Screws

DIN 964 A- Slotted Oval Head Machine Screws

DIN 965 A - Cross Recessed Flat Head Machine Screws

DIN 966 A - Cross Recessed Oval Head Machine Screws

DIN 980 V - Self-Locking Nuts; All Metal Construction

DIN 982 - Self- Locking Nuts w/nylon Insert: Heavy Series

DIN 985 - Self Locking Nuts w/locking Insert: Standard Series

DIN 986 - Self Locking Domed Cap Nuts with Nylon Insert

DIN 988 - Shim Washers

 

 

ASME Fasteners

 

ASME SA193 : Alloy & Stainless Steel Bolting Material for High Temperature

ASME SA193M : Alloy & Stainless Steel Bolting Material for High Temperature

ASME SA194 : Alloy & Stainless Steel Nuts for High Temperature

ASME SA194M : Alloy & Stainless Steel Nuts for High Temperature

ASME SA307 : Carbon Steel Externally Threaded Fasteners

ASME SA307M : Carbon Steel Externally Threaded Fasteners

ASME SA320 : Alloy & Stainless Steel Bolting for Low Temperature

ASME SA320M : Alloy & Stainless Steel Bolting for Low Temperature

ASME SA325 : High Strength Bolts for Structural Joints

ASME SA325M : High Strength Bolts for Structural Joints

ASME SA354 : Quenched & Tempered Alloy Steel Bolts, Studs & Other Fasteners

ASME SA354M : Quenched & Tempered Alloy Steel Bolts, Studs & Other Fasteners

ASME SA437 : Alloy Steel turbine Bolting Specially Heat Treated for High Temperature

ASME SA437M : Alloy Steel turbine Bolting Specially Heat Treated for High Temperature

ASME SA449 : Quenched & Tempered Bolts & Studs

ASME SA449M : Quenched & Tempered Bolts & Studs

ASME SA453 : Bolting Material, High Temperature 50 to 120 ksi Yield Strength

ASME SA453M : Bolting Material, High Temperature 50 to 120 ksi Yield Strength

ASME SA489 : Carbon Steel Eyebolts

ASME SA489M : Carbon Steel Eyebolts

ASME SA490 : Heat Treated Structural Bolts, 150 ksi Tensile Strength

ASME SA490M : Heat Treated Structural Bolts, 150 ksi Tensile Strength

ASME SA540 : Alloy Steel Bolting for Special Applications

ASME SA540M : Alloy Steel Bolting for Special Applications

ASME SA563 : Carbon & Alloy Steel Nuts

ASME SA563M : Carbon & Alloy Steel Nuts

ASME SA574 : Alloy Steel Socket Head Cap Screws

ASME SA574M : Alloy Steel Socket Head Cap Screws

ASME SA687 : High Strength Non Headed Steel Bolts & Studs

ASME SA687M : High Strength Non Headed Steel Bolts & Studs

ASME F436 : Hardened Flat Washers

ASME F436M : Hardened Flat Washers

ASME F467 : Nonferrous Nuts for General Use

ASME F467M : Nonferrous Nuts for General Use

ASME F468 : Nonferrous Bolts, Cap Screws, & Studs for General Use

ASME F468M : Nonferrous Bolts, Cap Screws, & Studs for General Use

ASME F541 : Alloy Steel Eyebolts

ASME F541M : Alloy Steel Eyebolts

ASME F568 : Carbon & Alloy Steel Metric Fasteners

ASME F568M : Carbon & Alloy Steel Metric Fasteners

ASME F593 : Stainless Steel Bolts, Cap Screws & Studs

ASME F593M : Stainless Steel Bolts, Cap Screws & Studs

ASME F594 : Stainless Steel Nuts

ASME F594M : Stainless Steel Nuts

ASME F738 : Stainless Steel Metric Bolts, Screws & Studs

ASME F738M : Stainless Steel Metric Bolts, Screws & Studs

ASME F835 : Metric Socket Head Cap Screws

ASME F835M : Metric Socket Head Cap Screws

ASME F836 : Metric Stainless Steel Nuts

ASME F836M : Metric Stainless Steel Nuts

ASME F844 : Steel Washers for General Use

ASME F844M : Steel Washers for General Use

 

 

ASTM Fasteners

 

ASTM A193 : Alloy & Stainless Steel Bolting Material for High Temperature

ASTM A193M : Alloy & Stainless Steel Bolting Material for High Temperature

ASTM A194 : Alloy & Stainless Steel Nuts for High Temperature

ASTM A194M : Alloy & Stainless Steel Nuts for High Temperature

ASTM A307 : Carbon Steel Externally Threaded Fasteners

ASTM A307M : Carbon Steel Externally Threaded Fasteners

ASTM A320 : Alloy & Stainless Steel Bolting for Low Temperature

ASTM A320M : Alloy & Stainless Steel Bolting for Low Temperature

ASTM A325 : High Strength Bolts for Structural Joints

ASTM A325M : High Strength Bolts for Structural Joints

ASTM A354 : Quenched & Tempered Alloy Steel Bolts, Studs & Other Fasteners

ASTM A354M : Quenched & Tempered Alloy Steel Bolts, Studs & Other Fasteners

ASTM A437 : Alloy Steel turbine Bolting Specially Heat Treated for High Temperature

ASTM A437M : Alloy Steel turbine Bolting Specially Heat Treated for High Temperature

ASTM A449 : Quenched & Tempered Bolts & Studs

ASTM A449M : Quenched & Tempered Bolts & Studs

ASTM A453 : Bolting Material, High Temperature 50 to 120 ksi Yield Strength

ASTM A453M : Bolting Material, High Temperature 50 to 120 ksi Yield Strength

ASTM A489 : Carbon Steel Eyebolts

ASTM A489M : Carbon Steel Eyebolts

ASTM A490 : Heat Treated Structural Bolts, 150 ksi Tensile Strength

ASTM A490M : Heat Treated Structural Bolts, 150 ksi Tensile Strength

ASTM A540 : Alloy Steel Bolting for Special Applications

ASTM A540M : Alloy Steel Bolting for Special Applications

ASTM A563 : Carbon & Alloy Steel Nuts

ASTM A563M : Carbon & Alloy Steel Nuts

ASTM A574 : Alloy Steel Socket Head Cap Screws

ASTM A574M : Alloy Steel Socket Head Cap Screws

ASTM A687 : High Strength Non Headed Steel Bolts & Studs

ASTM A687M : High Strength Non Headed Steel Bolts & Studs

ASTM F436 : Hardened Flat Washers

ASTM F436M : Hardened Flat Washers

ASTM F467 : Nonferrous Nuts for General Use

ASTM F467M : Nonferrous Nuts for General Use

ASTM F468 : Nonferrous Bolts, Cap Screws, & Studs for General Use

ASTM F468M : Nonferrous Bolts, Cap Screws, & Studs for General Use

ASTM F541 : Alloy Steel Eyebolts

ASTM F541M : Alloy Steel Eyebolts

ASTM F568 : Carbon & Alloy Steel Metric Fasteners

ASTM F568M : Carbon & Alloy Steel Metric Fasteners

ASTM F593 : Stainless Steel Bolts, Cap Screws & Studs

ASTM F593M : Stainless Steel Bolts, Cap Screws & Studs

ASTM F594 : Stainless Steel Nuts

ASTM F594M : Stainless Steel Nuts

ASTM F738 : Stainless Steel Metric Bolts, Screws & Studs

ASTM F738M : Stainless Steel Metric Bolts, Screws & Studs

ASTM F835 : Metric Socket Head Cap Screws

ASTM F835M : Metric Socket Head Cap Screws

ASTM F836 : Metric Stainless Steel Nuts

ASTM F836M : Metric Stainless Steel Nuts

ASTM F844 : Steel Washers for General Use

ASTM F844M : Steel Washers for General Use



 

HEAT-TREATED ALLOY STUDS, BOLTS THREADED BARS & RODS

Chemical Composition

Elements A354 Grades BC, BD A193 Grade B7
**See Note Below Chromium-Molybdenum
Range percent Check variation
over percent
Range percent Check variation
over or under percent
Carbon... -- -- *0.38-0.48 0.02
Manganese... -- -- 0.750-1.00 0.04
Phosphorus, max... 0.04 0.005 0.04 0.005 over
Sulphur, max... 0.04 0.005 0.04 0.005 over
Silicon... -- -- 0.20-0.35 0.02
Chromium... -- -- 0.80-1.10 0.05
Molybdenum... -- -- 0.15-0.25 0.02

 

 

Elements A193 Grade B16
Chromium-Molybdenum-Vanadium
Range percent Check variation
over or under percent
Carbon... 0.36-0.44 0.02
Manganese... 0.45-0.70 0.03
Phosphorus, max... 0.04 0.005 over
Sulphur, max... 0.04 0.005 over
Silicon... 0.20-0.35 0.02
Chromium... 0.80-1.15 0.05
Molybdenum... 0.50-0.65 0.03
Vanadium... 0.25-0.35 0.03

 

Elements A320 Grade L7 A320 Grade L43
Chromium-Molybdenum
(AISI 4140, 4142, 4145)
Nickel-Chromium-Molybdenum
(AISI 4340)
Range percent Check variation
over percent
Range percent Check variation
over or under percent
Carbon... *0.38-0.48 0.02 0.38-0.148 0.02
Manganese... 0.75-1.00 0.04 0.60-0.85 0.03
Phosphorus, max... 0.04 0.005 over 0.04 0.005 over
Sulphur, max... 0.04 0.005 over 0.04 0.005 over
Silicon... 0.20-0.35 0.02 0.20-0.35 0.02
Nickel... -- -- 1.65-2.00 0.05
Chromium... 0.80-1.10 0.05 0.70-1.90 0.03
Molybdenum... 0.15-0.25 0.02 0.20-0.30 0.02

*For bar sizes over 3-1/2 in. to 4 in., inclusive, the carbon content may be 0.50 pct. max.

** Any alloy steel capable of meeting the tensile requirements of Specification A354 may be used.

Tensile Requirements

Grade Diameter, in. Min
tempering
temp F
Tensile
strength
min psi
Yield
point
min psi
Elongation
in 2 in.
min pct
Reduction
of area
min pct
A354 Grade BC {2-1/2 and under
{Over 2-1/2 to 4 incl.
850 125,000 109,000 16 50
A354 Grade BD 1-1/2 and under 850 115,000 99,000 16 45
A193 Grade B7
Chromium-
Molybdenum
{2-1/2 and under
{Over 2-1/2 to 4 incl.
{Over 4 to 7 incl.
850 150,000 125,000 14 35
A193 Grade B16
Chromium-
Molybdenum-
Vanadium
{2-1/2 and under
{Over 2-1/2 to 4 incl.
{Over 4 to 7 incl.
1100
1100
1100
125,000
115,000
100,000
105,000
95,000
75,000
16
16
18
50
50
50
A320 Grade L7
Chromium-
Molybdenum
2-1/2 and under -- 125,000 105,000 16 50
A320 Grade L43
Nickel-Chromium-
Molybdenum
4 and under -- 125,000 105,000 16 50

Commonly used are the following grades of heat-treated alloy steel for high-pressure or extreme temperature service in diameters of 1/2 in. to 2 in., inclusive. Other grades and other diameters are available on special order.

ASTM A354, Grades BC and BD - heat-treated alloy steels for applications at normal atmospheric temperatures where high strength is required.

ASTM A193, Grade B7 - a heat-treated chromium-molybdenum steel widely used for medium high-temperature service.

ASTM A193, Grade B16 - a heat-treated chromium-molybdenum-vanadium steel for high-pressure, high-temperature service.

ASTM A320, Grade L7 - This grade is intended for low-temperature service down to minus 150ºF and has a minimum Charpy impact value of 15 ft-lb at this temperature. Sizes 2-1/2 in. and under.

ASTM A320, Grade L43 - The same properties offered by Grade L7 in sizes up to 2-1/2 are obtainable up to 4 in. in Grade L43


 

ASTM, SAE AND ISO GRADE MARKINGS AND MECHANICAL PROPERTIES FOR STEEL FASTENERS

Identification
Grade Mark
Specification Fastener
Description
Material Nominal Size
Range (in.)
Mechanical Properties
Proof Load
(psi)
Yield Strength
Min (psi)
Tensile Strength
Min (psi)

No
Grade
Mark
SAE J429
Grade 1
Bolts,
Screws,
Studs
Low or Medium Carbon Steel 1/4 thru 1-1/2 33,000 36,000 60,000
ASTM A307
Grades A&B
Low Carbon Steel 1/4 thru 4 -- --
SAE J429
Grade 2
Low or Medium Carbon Steel 1/4 thru 3/4 Over 3/4 to 1-1/2 55,000
33,000
57,000
36,000
74,000
60,000

No
Grade
Mark
SAE J429
Grade 4
Studs Medium Carbon Cold Drawn Steel 1/4 thru 1-1/2 -- 100,000 115,000

B5
ASTM A193
Grade B5
  AISI 501 1/4 Thru 4 -- 80,000 100,000

B6
ASTM A193
Grade B6
AISI 410 85,000 110,000

B7
ASTM A193
Grade B7
AISI 4140, 4142, OR 4105 1/4 thru 2-1/2
Over 2-1/2 thru 4
Over 4 thru 7
--
--
--
105,000
95,000
75,000
125,000
115,000
100,000

B16
ASTM A193
Grade B16
CrMoVa Alloy Steel 105,000
95,000
85,000
125,000
115,000
100,000

B8
ASTM A193
Grade B8
AISI 304 1/4 and larger -- 30,000 75,000

B8C
ASTM A193
Grade B8C
AISI 347

B8M
ASTM A193
Grade B8M
AISI 316

B8T
ASTM A193
Grade B8T
Bolts,
Screws,
Studs for High-Temperature Service
AISI 321 1/4 and larger -- 30,000 75,000

B8
ASTM A193
Grade B8
AISI 304
Strain Hardened
1/4 thr 3/4
Over 3/4 thru 1
Over 1 thru 1-1/4
Over 1-1/4 thru 1-1/2
--
--
--
--
100,000
80,000
65,000
50,000
125,000
115,000
105,000
100,000

B8C
ASTM A193
Grade B8C
AISI 347
Strain Hardened

B8M
ASTM A193
Grade B8M
AISI 316
Strain Hardened
95,000
80,000
65,000
50,000
110,000
100,000
95,000
90,000

B8T
ASTM A193
Grade B8T
AISI 321
Strain Hardened
100,000
80,000
65,000
50,000
125,000
115,000
105,000
100,000

L7
ASTM A320
Grade L7
Bolts,
Screws,
Studs for Low-Temperature Service
AISI 4140,
4142 or 4145
1/4 thru 2-1/2 -- 105,000 125,000

L7A
ASTM A320
Grade L7A
AISI 4037

L7B
ASTM A320
Grade L7B
AISI 4137

L7C
ASTM A320
Grade LC7
AISI 8740

L43
ASTM A320
Grade L43
AISI 4340 1/4 thru 4 -- 105,000 125,000

B8
ASTM A320
Grade B8
Bolts,
Screws,
Studs for Low-Temperature Service
AISI 304 1/4 and larger -- 30,000 75,000

B8C
ASTM A320
Grade B8C
AISI 347

B8T
ASTM A320
Grade B8T
AISI 321

B8F
ASTM A320
Grade B8F
AISI 303
or 303Se

B8M
ASTM A320
Grade B8M
AISI 316

B8
ASTM A320
Grade B8
AISI 304 1/4 thru 3/4
Over 3/4 thru 1
Over 1 thru 1-1/4
Over 1-1/4 thru 1-1/2
--
--
--
--
100,000
80,000
65,00
50,00
100,000
80,000
65,00
50,00

B8C
ASTM A320
Grade B8C
AISI 347

B8F
ASTM A320
Grade B8F
AISI 303
or 303Se

B8M
ASTM A320
Grade B8M
AISI 316

B8T
ASTM A320
Grade B8T
AISI 321
SAE J429
Grade 5
Bolts,
Screws,
Studs
Medium Carbon Steel, Quenched and Tempered 1/4 thru 1
Over 1 to 1-1/2
85,000
74,000
92,000
81,000
120,000
105,000
ASTM A449 1/4 thru 1
Over 1 to 1-1/2
Over 1-1/2 thru 3
85,000
74,000
55,000
92,000
81,000
58,000
120,000
105,000
90,000
SAE J429
Grade 5.1
Sems Low or Medium Carbon Steel, Quenched and Tempered No. 6
thru 3/8
85,000 -- 120,000
SAE J429
Grade 5.2
Bolts,
Screws,
Studs
Low Carbon Martensitic Steel, Quenched and Tempered 1/4 thru 1 85,000 92,000 120,000

A325
ASTM A325
Type 1
High Strength
Structural Bolts
Medium Carbon Steel, Quenched and Tempered 1/2 thru 1
1-1/8 thru 1-1/2
85,000
74,000
92,000
81,000
120,000
105,000

A325
ASTM A325
Type 2
Low Carbon Martensitic Steel, Quenched and Tempered 1/2 thru 1 85,000 92,000 120,000

A325
ASTM A325
Type 3
Atmospheric Corrosion Resisting Steel, Quenched and Tempered 1/2 thru 1
1-1/8 thru 1-1/2
85,000
74,000
92,000
81,000
120,000
105,000

BB
ASTM A354
Grade BB
Bolts,
Studs
Alloy Steel, Quenched and Tempered 1/4 thru 2-1/2
2-3/4 thru 4
80,000
75,000
83,000
78,000
105,000
100,000

BC
ASTM A354
Grade BC
105,000
95,000
109,000
99,000
125,000
115,000
SAE J429
Grade 7
Bolts,
Screws,
Medium Carbon Alloy Steel, Quenched and Tempered 4 1/4 thru 1-1/2 105,000 115,000 133,000
SAE J429
Grade 8
Bolts,
Screws,
Studs
Medium Carbon Alloy Steel, Quenched and Tempered 1/4 thru 1-1/2 120,000 130,000 150,000
ASTM A354
Grade BD
Alloy Steel, Quenched and Tempered 4

No Grade
Mark
SAE J429
Grade 8.1
Studs Medium Carbon Alloy or SAE 1041 Modified Elevated Temperature Drawn Steel 1/4 thru 1-1/2 120,000 130,000 150,000

A490
ASTM A490 High Strength Structural Bolts Alloy Steel, Quenched and Tempered 1/2 thru 1-1/2 120,000 130,000 150,000 min
170,000 max

No Grade
Mark
ISO R898
Class 4.6
Bolts,
Screws,
Studs
Medium Carbon Steel, Quenched and Tempered All Sizes
thru 1-1/2
33,000 36,000 60,000

No Grade
Mark
ISO R898
Class 5.8
55,000 57,000 74,000
8.8

or

88
ISO R898
Class 8.8
Alloy Steel, Quenched and Tempered 85,000 92,000 120,000
10.9

or

109
ISO R898
Class 10.9
120,000 130,000 150,000

 

FASTENER IDENTIFICATION MARKING

Grade
Identification
Marking
Specification Material Nominal Size
In.
Proof
Load
Stress
ksi
Hardness
Rockwell
See
Note
Min Max

No Mark
ASTM A563 - Grade 0 Carbon Steel 1/4 thru 1-1/2 69 B55 C32 3,4
ASTM A563 - Grade A Carbon Steel 1/4 thru 1-1/2 90 B68 C32 3,4
ASTM A563 - Grade B Carbon Steel 1/4 thru 1 120 B69 C32 3,4
over 1 thru 1-1/2 105
ASTM A563 - Grade C Carbon Steel
May be Quenched
and Tampered
1/4 thru 4 144 B78 C38 5
ASTM A563 - Grade C3 Atmospheric
Corrosion
Resistant Steel
May be Quenched
and Tampered
1/4 thru 4 144 B78 C38 5,9
ASTM A563 - Grade D Carbon Steel
May be Quenched
and Tampered
1/4 thru 4 150 B84 C38 6
ASTM A563 - Grade DH Carbon Steel
Quenched
and Tampered
1/4 thru 4 175 C24 C38 6
ASTM A563 - Grade DH3 Atmospheric
Corrosion
Resistant Steel,
Quenched
and Tampered
1/4 thru 4 175 C24 C38 5,9
ASTM A194 - Grade 1 Carbon Steel 1/4 thru 4 130 B70 -- 7
ASTM A194 - Grade 2 Medium Carbon
Steel
1/4 thru 4 150 159 352 7,8
ASTM A194 - Grade 2H Medium Carbon
Steel, Quenched
and Tempered
1/4 thru 4 175 C24 C38 7
ASTM A194 - Grade 2HM Medium Carbon
Steel, Quenched
and Tempered
1/4 thru 4 150 159 237 7,8
ASTM A194 - Grade 4 Medium Carbon
Alloy Steel,
Quenched
and Tempered
1/4 thru 4 175 C24 C38 7
ASTM A194 - Grade 7 Medium Carbon
Alloy Steel,
Quenched
and Tempered
1/4 thru 4 175 C24 C38 7
ASTM A194 - Grade 7M Medium Carbon
Alloy Steel,
Quenched
and Tempered
1/4 thru 4 150 159 237 7
See Note 1,2 10            

NOTES:

  1. In addition to the indicated grade marking, all grades, except A563 grades O, A and B, must be marked for manufacturer identification.
  2. The markings shown for all grades of A194 nuts are for cold formed and hot forged nuts. When nuts are machined from bar stock the nut must be additionally marked with the letter 'B'.
  3. Nuts are not required to be marked unless specified by the purchaser. When marked, the identification marking shall be the grade letter O, A or B.
  4. Properties shown are those of nonplated or noncoated coarse thread hex nuts.
  5. Properties shown are those of coarse thread heavy hex nuts.
  6. Properties shown are those of coarse thread heavy hex nuts.
  7. Properties shown are those of coarse 8-pitch thread heavy hex nuts.
  8. Hardnesses are Brinell Hardness Numbers.
  9. The nut manufacturer, at his option, may add other markings to indicate the use of atmospheric corrosion resistant steel.
  10. Specifications --
    ASTM A563 -- Carbon and Alloy Steel Nuts.
    ASTM A194/A194M -- Carbon and Alloy Steel Nuts for Bolts for High Pressure and High Temperature Service


Mechanical Requirements for Stainless Steel Fasteners

Grade(1) General
Descpription
of Material
Bolts, Screws and Studs Nuts
Full Size Bolts,
Screws, Studs
Machine Test Sprecimens of
Bolts, Screws, Studs
Hardness
Rockwell
Proof
Load
Stress
Hardness
Rockwell
Yield (2)
Strength
Tensile
Strength
Yield (2)
Strength
Tensile
Strength
Elong-
ation(3)
Min psi Min psi Min psi Min psi % Min. Min psi Min
303A Austenitic
Stainless Steel-
Sol. Annealed
30,000 75,000 30,000 75,000 20 B75 75,000 B75
304-A Austenitic
Stainless Steel-
Sol. Annealed
30,000 75,000 30,000 75,000 20 B75 75,000 B75
304 Austenitic
Stainless Steel-
Cold Worked
50,000 90,000 45,000 85,000 20 B85 90,000 B85
304-SH Austenitic
Stainless Steel-
Strain Hardened
See
Note 6
See
Note 6
See
Note 6
See
Note 6
15 C25 See
Note 6
C20
305-A Austenitic
Stainless Steel-
Sol. Annealed
30,000 75,000 30,000 75,000 20 B70 75,000 B70
305 Austenitic
Stainless Steel-
Cold Worked
50,000 90,000 45,000 85,000 20 B85 90,000 B85
305-SH Austenitic
Stainless Steel-
Strain Hardened
See
Note 6
See
Note 6
See
Note 6
See
Note 6
15 C25 See
Note 6
C20
316-A Austenitic
Stainless Steel-
Sol. Annealed
30,000 75,000 30,000 75,000 20 B70 75,000 B70
316 Austenitic
Stainless Steel-
Cold Worked
50,000 90,000 45,000 85,000 20 B85 90,000 B85
316-SH Austenitic
Stainless Steel-
Strain Hardened
See
Note 6
See
Note 6
See
Note 6
See
Note 6
15 C25 See
Note 6
C20
XM7-A Austenitic
Stainless Steel-
Sol. Annealed
30,000 75,000 30,000 75,000 20 B70 75,000 B70
XM7 Austenitic
Stainless Steel-
Cold Worked
50,000 90,000 45,000 85,000 20 B85 90,000 B85
384-A Austenitic
Stainless Steel-
Sol. Annealed
30,000 75,000 30,000 75,000 20 B70 75,000 B70
384 Austenitic
Stainless Steel-
Cold Worked
50,000 90,000 45,000 85,000 20 B85 90,000 B85
410-H Martensitic
Stainless Steel-
Hardened and
Tempered
95,000 125,000 95,000 125,000 20 C22 125,000 C22
410-HT Martensitic
Stainless Steel-
Hardened and
Tempered
135,000 180,000 135,000 180,000 12 C36 180,000 C36
416-H Martensitic
Stainless Steel-
Hardened and
Tempered
95,000 125,000 95,000 125,000 20 C22 125,000 C22
416-HT Martensitic
Stainless Steel-
Hardened and
Tempered
135,000 180,000 135,000 180,000 12 C36 180,000 C36
430 Ferritic
Stainless Steel
40,000 70,000 40,000 70,000 20 B75 70,000 B75

 

Note 6. Austenitic stainless steel, strain hardened bolts, screws, studs, and nuts shall have the following strength per properties.

Product
Size
Bolts, Screws, Studs Nuts
Tested Full Size Machine Test Specimens, Proof
Load
Stress
Yield
Strength
Tensile
Strength
Yield
Strength
Tensile
Strength
in. min psi min psi min psi min psi psi
to 5/8 in. 100,000 125,000 90,000 115,000 125,000
over 5/8 to 1 in. 70,000 105,000 65,000 100,000 105,000
over 1 to 1-1/2 in. 50,000 90,000 45,000 85,000 90,000


Table 9  
FASTENER DATA
Basic Product Product Type and Head Style Available Size Range For thread and dimension details refer to: For mechanical property details refer to Table 10 or:
 
Metric Bolts hex M5-M100 ANSI/ASME B18.2.3.5M ASTM F568M
ASTM F486M
ASTM F738M
heavy hex M12-M36 ANSI/ASME B18.2.3.6M
round head short square neck (carriage) M8-M20 ANSI/ASME B18.5.2.1M
round head square neck (carriage) M5-M24 ANSI/ASME B18.5.2.2M
bent M5 and larger IFI 528 [sic]
heavy hex structural M12-M36 ANSI/ASME B18.2.3.7M ASTM A325M
ASTM A490M
hex transmission tower M16-M24 IFI 541 [sic] IFI 541 [sic]
 
Metric Screws hex cap M5-M100 ANSI/ASME B18.2.3.1M ASTM F568M
ASTM F468M
ASTM F738M
formed hex M5-M24 ANSI/ASME B18.2.3.2M
heavy hex M12-M36 ANSI/ASME B18.2.3.3M
hex flange M5-M16 ANSI/ASME B18.2.3.4M
heavy hex flange M10-M20 ANSI/ASME B18.2.3.9M
hex lag M5-M24 ANSI/ASME B18.2.3.8M see note 3 [sic]
 
Metric Studs double end M5-M100 IFI 528 [sic] ASTM F568M
ASTM F468M
ASTM F736M
continuous thread M5-M100
 
Metric Locking Screws prevailing torque, non-metallic insert M1.6-M36 see note 3 [sic] IFI 524
chemical coated M6-M20 see note 3 [sic] IFI 525
 
Metric Socket Screws socket head cap M1.6-M48 ANSI/ASME B18.3.1M ASTM A574M
ASTM F837M
socket head shoulder M6.5-M25 ANSI/ASME B18.3.3M ASTM F835M
ASTM A574M
ASTM F879M
socket button head cap M3-M16 ANSI/ASME B18.3.4M
socket countersunk head cap M3-M20 ANSI/ASME B18.3.5M
socket set M1.6-M24 ANSI/ASME B18.3.6M ANSI/ASME B18.3.6M
ASTM F912M
ASTM F880M
 
Metric Nuts hex, style 1 M1.6-M36 ANSI/ASME B18.2.4.1M ASTM A563M
ASTM F467M
ASTM F836M
ASTM A194M
hex, style 2 M3-M36 ANSI/ASME B18.2.4.2M
slotted hex M5-M36 ANSI/ASME B18.2.4.3M
hex flange M5-M20 ANSI/ASME B18.2.4.4M
hex jam M5-M36 ANSI/ASME B18.2.4.5M
heavy hex M12-M100 ANSI/ASME B18.2.4.6M
 
Metric Prevailing-
Torque Nuts
hex, steel M3-M36 ANSI/ASME B18.16.3M ANSI/ASME B18.16.1M
ANSI/ASME B18.16.2M
hex flange, steel M6-M20
 

Notes for Table 10.

  1. When only the ISO property class number is shown in Table 10, below, the class is standard in both ISO 898-1 and ASTM documents.  Properties specified in each are identical except for minor exceptions.  Where differences exist, the ASTM F 568M values are given.

  2. To compute the tensile proof load, tensile yield strength, or tensile ultimate strength in kilonewtons (kN) for a bolt, screw, or stud, multiply the stress value (MPa) in Table 10 by the tensile stress area (mm^2) of the product's screw thread as given in Table 9 or Standard Metric Bolt Shank Dimensions, then divide this result by 1000.

  3. In general, identification markings are located on the top of the head and preferably are raised.

  4. Class 5.8 products are available in lengths 150 mm and less.

  5. Caution is advised when considering the use of property class 12.9 products.  The capabilities of the fastener manufacturer, as well as the anticipated service environment, should be carefully considered.  Some environments may cause stress corrosion cracking of nonplated, as well as electroplated, products.


Table 10  
MECHANICAL REQUIREMENTS FOR CARBON STEEL
EXTERNALLY-THREADED METRIC FASTENERS
Property Class Designation Nominal Size of Product Material and Treatment Mechanical Requirements Property Class Ident. Marking
Proof Load Stress, MPa Tensile Yield Strength, MPa, Min. Tensile Ultimate Strength, MPa, Min. Prod. Hardness, Rockwell
Surface, Max. Core
Min. Max.
 
4.6 M5-M100 low or medium carbon steel 225 240 400 -- B67 B95 4.6
4.8 M1.6-M16 low or medium carbon steel, fully or partially annealed 310 340 420 -- B71 B95 4.8
5.8 M5-M24 low or medium carbon steel, cold worked 380 420 520 -- B82 B95 5.8
8.8 M16-M72 medium carbon steel, quenched and tempered 600 660 830 30N56 C23 C34 8.8
A325M Type 1 M16-M36 A325M  8S
8.8 M16-M36 low carbon boron steel, quenched and tempered 600 660 830 30N56 C23 C34 8.8
A325M Type 2 A325M  8S
A325M Type 3 M16-M36 atmospheric corrosion resistant steel, quenched and tempered 600 660 830 30N56 C23 C34 A325M  8S3
9.8 M1.6-M16 medium carbon steel, quenched and tempered 650 720 900 30N58 C27 C36 9.8
9.8 M1.6-M16 low carbon boron steel, quenched and tempered 650 720 900 30N58 C27 C36 9.8
10.9 M5-M20 medium carbon steel, quenched and tempered 830 940 1040 30N59 C33 C39 10.9
10.9 M5-M100 medium carbon alloy steel, quenched and tempered 830 940 1040 30N59 C33 C39 10.9
A490M Type 1 M12-M36 A490M  10S
10.9 M5-M36 low carbon boron steel, quenched and tempered 830 940 1040 30N59 C33 C39 10.9
A490M Type 2 M12-M36 A490M  10S
A490M Type 3 M12-M36 atmospheric corrosion resistant steel, quenched and tempered 830 940 1040 30N59 C33 C39 A490M  10S3
12.9 M1.6-M100 alloy steel, quenched and tempered 970 1100 1220 30N63 C38 C44 12.9



Inspection & Approval Certificates
: C/W Certificate (Calibration Works Certificate) EN10204 3.1 Mill Test Certificate, NACE MR-0175 / ISO 15156, European Pressure Equipment Directive PED-97/23/EC, AD-2000-WO, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, API 6A (American Petroleum Institute), with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3

If you have any requirement of above items, please feel free to contact us


Regards,



CONTACT PERSON :

 

 

MUKESH SHAH
Director
Mobile No. 0091 - 9820292499
Email -
marketing@rolexmetals.com


ROLEX METAL DISTRIBUTORS
( A METAL & STEEL Company )
57-A, KHATARGALLI,
THAKURDWAR,
MUMBAI - 400002, INDIA.
TEL.No. 0091-22-23858802
TEL.No. 0091-22-23823963
FAX No. 0091-22-23898724
Email -
marketing@rolexmetals.com
Website –
www.rolexmetals.com

 
 

CHAIRMAN – chairman@rolexmetals.com

MANAGING DIRECTOR – managingdirector@rolexmetals.com

TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com

SALES DIRECTOR – salesdirector@rolexmetals.com

COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com

 

COMMERCIAL MANAGER – commercial@rolexmetals.com

GENERAL MANAGER – generalmanager@rolexmetals.com

SALES MANAGER – salesmanager@rolexmetals.com

PURCHASE MANAGER – purchasemanager@rolexmetals.com

TECHNICAL MANAGER – technical@rolexmetals.com

WORKS MANAGER – worksmanager@rolexmetals.com

STORES MANAGER – stores@rolexmetals.com

WAREHOUSE MANAGER – warehouse@rolexmetals.com

SALES DOMESTIC – salesdomestic@rolexmetals.com

SALES INTERNATIONAL – salesinternational@rolexmetals.com

SALES GENERAL – sales@rolexmetals.com

PURCHASE GENERAL – purchase@rolexmetals.com

FINANCE MANAGER – finance@rolexmetals.com

ACCOUNTS MANAGER – accounts@rolexmetals.com

GENERAL INFORMATION – info@rolexmetals.com

 

EXPORT MANAGER – export@rolexmetals.com

IMPORT MANAGER – import@rolexmetals.com

AIR EXPORT – airexport@rolexmetals.com

SEA EXPORT – seaexport@rolexmetals.com

CUSTOMS – customs@rolexmetals.com

 

AIR FREIGHT – airfreight@rolexmetals.com

SEA FREIGHT – seafreight@rolexmetals.com

DESPATCH – despatch@rolexmetals.com

INSPECTION – inspection@rolexmetals.com

LOGISTICS – logistics@rolexmetals.com

TRANSPORT – transport@rolexmetals.com

 

KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com

TALOJA WAREHOUSE – taloja@rolexmetals.com

KHOPOLI WAREHOUSE – khopoli@rolexmetals.com

NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com

KANDLA WAREHOUSE – kandla@rolexmetals.com

MUMBAI WAREHOUSE – mumbai@rolexmetals.com

STOCKYARD – stockyard@rolexmetals.com

 

SERVICE – service@rolexmetals.com

SUPPORT – support@rolexmetals.com

RECRUITMENT – career@rolexmetals.com

WEBMASTER – webmaster@rolexmetals.com

CUSTOMER CARE – customercare@rolexmetals.com